山東山汽工程機械(集團)有限公司
熱線電話:400-879-1999 山汽官方微信
鄭重聲明 購機 售后
在線詢價
熱線電話:400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 行業新聞 >

攪拌機散熱器的使用方式是怎樣操作的?

所屬分類:行業新聞 發布時間:2020-08-19 來源:http://www.whjchh.com 瀏覽量:18

  正確運用攪拌機有利于施工的順利進行,而且可以進步工程工作效率,如果沒有正確運用會損害設備的機械部件,削減它的運用壽命。運用時的重中之中是要嚴格依照運用說明進行操作,一般在夏日如果全自動上料攪拌機溫度過高應該立刻停下來,等溫度降下來后再繼續運用。今日就讓小編為我們簡略介紹一下全自動上料攪拌機散熱器的正確運用方式:
  The correct use of automatic feeding mixer is conducive to the smooth construction, and can improve the efficiency of the project. If not properly used, it will damage the mechanical parts of the equipment and reduce its service life. The most important thing is to operate in strict accordance with the operation instructions. In summer, if the temperature of the automatic feeding mixer is too high, it should stop immediately and continue to use after the temperature drops. Today, let's make a brief introduction to the correct use of radiator of automatic feeding mixer truck
  1、備用的散熱器有效環境應保持通風、枯燥。
  1. The effective environment of standby radiator should be kept ventilated and dry.
  2、建議運用軟硬水需軟化處理后運用,避免形成散熱器內部堵塞及水垢的發生。
  2. It is suggested that soft and hard water should be used after softening treatment to avoid the formation of internal blockage and scale of radiator.
  3、在冬季為避免結冰形成芯子決裂現象,如攪拌車長時間停車或間接停車時,應將水箱蓋和放水開關,將水全部放出。
  3. In winter, in order to avoid core cracking caused by freezing, such as long-time stop or indirect stop of mixer truck, the water tank cover and water drain switch should be set to discharge all water.
  4、水位計應每3個月清洗一次或視實際情況,各部件拆下用溫水加無腐蝕性洗滌劑清洗。
  4. The water level gauge should be cleaned every 3 months or according to the actual situation, all parts should be removed and cleaned with warm water and non corrosive detergent.
              全自動上料攪拌機
  5、散熱器內要放水再灌水時,要先將發動機缸體的放水開關扭開,有水流出時,再關上,從而避免發生水泡。
  5. When the radiator needs to be drained and then filled with water, the drain switch of the engine block should be turned on first, and then turned off when there is water flowing out, so as to avoid blistering.
  6、在日常運用中應隨時查看水位,要停機降溫后加水。加水時,將水箱蓋漸漸翻開,作業人員身體應盡量遠離加水口,以防高壓蒸汽油加水口噴出形成燙壞。
  6. In daily use, the water level should be checked at any time, and water should be added after shutdown and cooling. When adding water, the water tank cover shall be opened gradually, and the operator's body shall be kept away from the water inlet as far as possible, so as to prevent scalding caused by high-pressure steam gasoline.
  7、散熱器不應與任何酸、堿或其它腐蝕性性質觸摸。
  7. The radiator should not touch with any acid, alkali or other corrosive properties.
  8、在運用防凍液,為了避免散熱器的腐蝕,請務必運用正規廠家生產且契合國家標準的長效防銹防凍液。
  8. In the use of antifreeze, in order to avoid the corrosion of radiator, please make sure to use the long-term anti rust antifreeze produced by regular manufacturers and in line with national standards.
  9、視實際情況用戶應在1~3個月間對散熱器進行清洗一次芯體。清洗時,用清水沿反進風向側沖洗。
  9. According to the actual situation, the user should clean the radiator once every 1-3 months. When cleaning, wash with clean water along the side of the reverse wind direction.
  10、在裝置散熱器過程中,請不要損壞散熱帶(片)和碰傷散熱器,以保證散熱能力和密封。
  10. In the process of installing the radiator, please do not damage the strapdown (piece) and bump the radiator to ensure the heat dissipation capacity and sealing.
  正確的操作方式,可以有效進步全自動上料攪拌機散熱器的運用效果,一起也可以避免在運用過程中因操作不當而對設備形成的損耗。希望這些常識可以協助我們對設備進行合理的操作以及運用。
  The correct operation mode can effectively improve the application effect of the radiator of the automatic feeding mixer, and also can avoid the loss of the equipment due to improper operation in the application process. I hope these common sense can help us to operate and use the equipment reasonably.
熱門產品 / HOT PRODUCT

 

首頁 產品 電話 置頂
99视频在线精品国自产拍亚瑟|bt天堂在线 男人影视|秋霞A级毛片在线看理论片|亚洲日韩欧美在线无卡