山東山汽工程機械(集團)有限公司
熱線電話:400-879-1999 山汽官方微信
鄭重聲明 購機 售后
在線詢價
熱線電話:400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 公司新聞 >

自動裝載移動式混凝土攪拌車介紹

所屬分類:公司新聞 發布時間:2021-09-06 來源:http://www.whjchh.com 瀏覽量:18

1、攪拌單元: 攪拌倉容量 3450立升,混凝土輸出量2.5立米/次。 雙螺旋結構。液壓電機,行星齒輪傳動。 正反轉實現攪拌,卸料。攪拌筒300°回轉,在車輛四周1.9米以上高度傾倒混凝土。
1. Mixing unit: the capacity of mixing bin is 3450l, and the concrete output is 2.5m3/time. Double helix structure. Hydraulic motor, planetary gear drive. Mixing and unloading are realized by forward and reverse rotation. The mixing drum rotates 300 ° and dumps concrete at a height of more than 1.9m around the vehicle.
2、發動機:珀金斯渦輪增壓柴油機 1104 D-44 TA, 水冷式四缸,功率 62.5千瓦, 84馬力。后置。
2. Engine: Perkins turbocharged diesel engine 1104 d-44 TA, water-cooled four cylinder, maximum power 62.5 kW, 84 HP. Post.
3、傳動系統; 采用德國博士 力士樂液壓元件。 發動機帶動2套系統(4驅動行走和攪拌)工作。
3. Transmission system; German doctor Rexroth hydraulic components are adopted. The engine drives 2 sets of systems (4 drive walking and mixing) to work.
4、速度: 工作速度0-9公里/小時, 路上行走速度 0-25公里/小時。
4. Speed: the working speed is 0-9 km / h, and the walking speed on the road is 0-25 km / h.
5、駕駛席:前置具有Rops-Fops(防翻滾-防墜落)保護標準雙開門司機室。
5. Driver's seat: front double door cab with international ROPS FOPS (anti roll - anti fall) protection standard.
6、液壓系統: 3回路,2個可變輸出泵 分別帶動傳動系統和 回轉系統。2齒輪泵負責進出過濾系統,和水熱油的熱交換。
自動上料攪拌機
6. Hydraulic system: three circuits and two variable output pumps drive the transmission system and the rotation system respectively. 2 gear pump is responsible for the heat exchange with water and hot oil in and out of the filtration system.
7、操縱桿: 料斗的所有液壓控制動作由一個操縱桿完成。
7. Control lever: all hydraulic control actions of the hopper are completed by one control lever.
8、計量: 電子稱重單元為可選部件,具有司機室輸出打印功能。
8. Metering: the electronic weighing unit is an optional component and has the output printing function in the cab.
9、布料斗: 400立升帶有液壓控制閘門的料斗。
9. Distribution hopper: 400 liter hopper with hydraulic control gate.
10、出料滑道: 液壓控制可回轉.由2個銷軸固定,易拆卸來增加卸料高度。
10. Discharge chute: it can rotate under hydraulic control. It is fixed by two pin shafts and easy to disassemble to increase the discharge height.
11、供水: 車載水供應系統,附帶水表,高壓水槍(可選件)
11. Water supply: vehicle mounted water supply system, with water meter and high-pressure water gun (optional)
12、可爬行坡度:滿載時30%
12. Crawling slope: 30% at full load
13、制動系統: 油浴式盤式制動器。雙軸不同回路控制。 負液壓停車制動系統
13. Brake system: oil bath disc brake. Dual axis different loop control. Negative hydraulic parking brake system
14、輪胎:工程工業用胎12.5-20 PR 12.
14. Tire: engineering industrial tire 12.5-20 PR 12
15、轉向系統: 靜流體液壓 3向轉向,回轉半徑內部 1500mm 外部3500mm
15. Steering system: hydrostatic 3-way steering, with a turning radius of 1500mm inside and 3500mm outside
16、電力系統: 12V 120 Ah 電池提供路上照明和發動機啟動,緊急制動
16. Power system: 12V 120 ah battery provides road lighting, engine start and emergency braking
17、油,水箱:水 2×270立升 , 柴油 105立升,液壓油 80立升。
17. Oil, water tank: water 2 × 270 litres, 105 litres of diesel, 80 litres of hydraulic oil.
18、底盤: 滿足工程需要特制鋼質底盤
18. Chassis: special steel chassis to meet the needs of the project
19、重量:6100公斤 均勻分布在2軸上。
19. Weight: 6100kg, evenly distributed on 2 axes.
20、安全規范:本機械配備自動檢測和滿載自動鎖死閥門系統。如鏟臂工作時,可自動控制攪拌筒旋轉。
20. Safety specification: This machine is equipped with automatic detection and full load automatic locking valve system. If the shovel arm works, it can automatically control the rotation of the mixing drum.
熱門產品 / HOT PRODUCT

 

首頁 產品 電話 置頂
99视频在线精品国自产拍亚瑟|bt天堂在线 男人影视|秋霞A级毛片在线看理论片|亚洲日韩欧美在线无卡