山東山汽工程機械(集團)有限公司
熱線電話:400-879-1999 山汽官方微信
鄭重聲明 購機 售后
在線詢價
熱線電話:400-879-1999
您現在所在的位置: 首頁> 新聞資訊 > 公司新聞 >

自動攪拌機生銹應該怎樣做?

所屬分類:公司新聞 發布時間:2020-08-12 來源:http://www.whjchh.com 瀏覽量:18

  全自動上料攪拌機如果出現了銹跡,不僅僅會使車變的不美觀,還會腐蝕攪拌車,因此我們要在日常生活中時刻檢查全自動上料攪拌機,如果發現有生銹的痕跡,就要及時處理。
  If the full-automatic feeding mixer has rust, it will not only make the car ugly, but also corrode the mixer. Therefore, we should always check the automatic feeding mixer in our daily life, and if we find any traces of rust, we should deal with them in time.
  1、警惕好點小傷疤
  1. Watch out for small scars
  經常出現全自動上料攪拌機車漆表面水泥攪拌車生銹,除了常見的碰撞,刮傷,駕駛輪胎彈出小石塊在油漆,也會導致小剝落的油漆點時間長會產生水泥攪拌車生銹斑。和大多數的小傷疤,因為很小,容易被忽略。因此,定期檢查車身,發動機艙口和身體四周,一旦發現將及時進行處理。
  The cement mixer on the paint surface of the full-automatic feeding mixer often rusts. In addition to the common collision, scratch, small stones ejected from the driving tire in the paint, small peeling paint spots will be caused for a long time, resulting in rust spots on the cement mixer truck. And most of the small scars, because they are small, are easy to ignore. Therefore, regular inspection of the body, engine hatch and around the body, once found will be dealt with in a timely manner.
  2、經常檢查適度容易積水的地方
  2. Check the place where water is easy to accumulate
            全自動上料攪拌機
  全自動上料攪拌機行駛在路上,在雨雪天氣或通過泥水路很難避免,比如一些空間底部的全自動上料攪拌機車身和地板等處容易積累污泥,如車主不及時清理,將會使水分隱藏。全自動上料攪拌機車輪內部和外部邊緣,邊緣角底部的門,樹干,車門鎖眼和活躍擋風玻璃刮水器的一部分,要經常檢查大門,想要保持身體的各個部分同時排水明溝,濕度檢查小泵覆蓋,如地毯、地板等,防止全自動上料攪拌機生銹。
  When the full-automatic charging mixer is on the road, it is difficult to avoid it in rainy and snowy weather or passing through the muddy waterway. For example, sludge is easily accumulated in the body and floor of the full-automatic charging mixer at the bottom of some spaces. If the owner does not clean it in time, the water will be hidden. Full automatic feeding mixer wheel internal and external edge, edge corner, bottom door, trunk, door keyhole and active windshield wiper part, should always check the door, want to keep all parts of the body at the same time drainage ditch, humidity check small pump cover, such as carpet, floor, etc., to prevent the full automatic feeding mixer from rusting.
  3、軟漆做封釉
  3. Soft paint for sealing glaze
  漆軟沙粒子擊中小泵車在高速的過程中可能會導致掉漆。對于這種,能給車身封釉,它可以形成一個網絡,強大的保護膜,提高表面硬度,效果可以保持一年左右,涂層可以達到類似的效果。此外,可以將車輛底部的底盤裝甲或密封模型,這樣可以保護底盤耐酸雨、耐腐蝕,使原涂層和干裂,不易脫落,也可以防止底盤上的鵝卵石的影響駕駛。
  The paint may fall off in the process of high speed. For this, it can seal the body glaze, it can form a network, strong protective film, improve the surface hardness, the effect can be maintained for about a year, the coating can achieve similar effect. In addition, the chassis armor or sealing model at the bottom of the vehicle can protect the chassis from acid rain and corrosion, make the original coating and dry crack, not easy to fall off, and also can prevent the influence of pebbles on the chassis on driving.
  以上是關于全自動上料攪拌機去除生銹的相關介紹,感謝您的閱讀,希望對您有所幫助,想要了解更多內容歡迎點擊http://www.whjchh.com官網。
  The above is about the automatic feeding mixer to prevent rust related introduction, thank you for reading, hope to help you, want to learn more, welcome to click the automatic feeding mixer http://www.whjchh.com Official website.
熱門產品 / HOT PRODUCT

 

首頁 產品 電話 置頂
99视频在线精品国自产拍亚瑟|bt天堂在线 男人影视|秋霞A级毛片在线看理论片|亚洲日韩欧美在线无卡